View Artikel Ilmiah

Kembali
NIM (Student Number)H1D013003
Nama MahasiswaM IKBAL HERMAN
Judul ArtikelPEMODELAN PONDASI PRACETAK SUMURAN SEGMENTAL DENGAN SOFTWARE ABAQUS DAN PLAXIS 3D FONDATION
AbstrakPenelitian ini didasari oleh semakin banyak kebutuhan infrastruktur yang dirasa baik menggunakan pondasi Sumuran. Pondasi sumuran mempunyai permasalahan dari segi kepastian mutu dilapangan yang terpasang dan waktu pengerjaan yang relatif lama sehingga berdampak pada keseluruhan durasi proyek. Jika durasi proyek terganggu maka perhitungan anggran biaya pun akan terganggu. Untuk menjawab permasalah diatas maka penelitian ini mencoba menerapkan konsep pracetak pada pondasi sumuran dengan membuat model pada Software Abaqus dan Plaxis 3D Fondation pada jenis tanah keras, sedang dan lunak. Software Abaqus digunakn untuk menganalisis kapasitas dari struktur pondasi pracetak sumuran segmental dan software Plaxis 3D Fondation digunakan untuk menganalisis kapasitas daya dukung tanah diman pondasi tersebut akan ditempatkan. Dari hasil analisis software Abaqus didapatkan kapasitas Pu sebesar 10 Ton dan momen sebesar 288,9455 KN.m. Hasil analisis dari software Plaxis 3D Fondation menunjukan kapasitas pada tanah keras sebesar 9,150 Ton, untuk tanah sedang didapatkan kapasitas sebesar 7,550 Ton, dan untuk tanah lunak didapatkan kapasitas sebesar 5,568 Ton.
Abstrak (Inggris)This research is based on the increasing demand of infrastructure with the usage of well fondation which is considered to be good nowadays. Well fondation has set of problem from many aspect, including the quality of the fondation in the field and the relatively long working time thus have impact to the whole duration of the project. If the duration of the project is disturbed, thus the estimation of the budget cost will be disturbed too. To answer all that problems then this research will try to apply the precast concept for the well fondation by creating the model in Abaqus software and Plaxis 3D Fondation in hard, moderate, and soft soil. Abaqus Software is used to analyze the capacity of the segment in well fondation precast structure and the Plaxis 3D fondation software is used to analyze the soil load bearing capacity which the fondation will be placed. From the analysis result of the Abaqus software obtained the Pu capacity equal to 288,9455 KN.m. The analysis result from the Plaxis 3D Fondation software shows the capacity in hard soil equal to 9,150 Ton, for moderate soil obatained capacity equalto 7,550 Ton,and for soft soil obtained capacity equal to 5,568 Ton.
Kata KunciKata Kunci: Pondasi sumuran,beton pracetak,kapasitas pondasi,kapasitas daya dukung tanah
Nama Pembimbing 1Nanang Gunawan Wariyatno,S.T.,M.T.
Nama Pembimbing 2Arwan Apriyono,S.T.,M.Eng.
Tahun2017
Jumlah Halaman6
Page generated in 0.0529 seconds.