View Artikel Ilmiah

Kembali
NIM (Student Number)H1D007084
Nama MahasiswaNUR CAKHYO WIBOWO
Judul ArtikelPEMANFAATAN LIMBAH KERAMIK KLAMPOK SEBAGAI AGREGAT KASAR BETON
AbstrakBeton banyak diaplikasikan dalam pekerjaan konstruksi bidang sipil diantaranya bangunan gedung, bangunan air, dan transportasi. Pada umumnya agregat kasar beton berasal dari batu kali, namun banyak material jenis lain yang dapat dimanfaatkan sebagai agregat kasar beton. Dalam penelitian ini dicoba penggunaan limbah padat dari industri keramik Klampok sebagai alternatif bahan agregat kasar pada beton. Tujuan penelitian ini adalah untuk mengetahui pengaruh prosentase limbah keramik Klampok sebagai pengganti agregat kasar terhadap nilai kuat tekan beton, dan komposisi prosentase agregat kasar limbah keramik Klampok dan batu pecah mesin yang tepat untuk mendapat nilai kuat tekan optimal. Benda uji yang digunakan berupa beton berbentuk silinder diameter 15 cm dan tinggi 30 cm berjumlah 20 buah yang terdiri dari 4 buah silinder beton untuk setiap variasi 0%, 25%, 50%, 75%, dan 100% agregat limbah keramik Klampok terhadap agregat kasar normal dari batu pecah. Hasil pengujian menunjukkan bahwa beton keramik Klampok mempunyai kuat tekan karakteristik sampai lebih rendah 41,89% dari kuat tekan beton normal 0% limbah keramik Klampok. Adapun kuat tekan optimumnya dicapai pada komposisi agregat kasar 50% limbah keramik Klampok 50% batu pecah dengan kuat tekan karakteristik sebesar 17,6888 Mpa.
Abstrak (Inggris)Concrete widely applied in the field of civil construction work including buildings, waterworks, and transportation. Generally coarse aggregate used in concrete mix is crushed stone, but there was many other types of materials that can be used as coarse aggregate concrete. This research tested the use of industrial solid Klampok ceramic waste as an alternative coarse aggregate in concrete. The purpose of this research was to determine the subtitution effect the percentage of ceramic waste coarse aggregate Klampok to the value of concrete compressive strength, and the right coarse aggregate composition to get the optimal value of compressive strength. The specimens used in this research was concrete cylinder diameter 15 cm and 30 cm high totaling 20 units consisting 4 pieces of concrete cylinders for each variation 0%, 25%, 50%, 75%, and 100% Klampok ceramic waste aggregate to aggregate normal coarse crushed stone. The result of testing ceramics concrete showed that Klampok ceramics concrete has charateristic compressive strength until lower than 41.89% of normal concrete with Klampok ceramic waste aggregate 0%. The optimum compressive strength reached on the composition of coarse aggregate 50% waste ceramic Klampok and 50% crushed stone with characteristic compressive strength of 17.6888 MPa.
Kata KunciBeton, Limbah Keramik Klampok, Kuat Tekan.
Nama Pembimbing 1NANANG GUNAWAN W., ST, MT
Nama Pembimbing 2ARWAN APRIYONO., ST, M.Eng.
Tahun2012
Jumlah Halaman16
Page generated in 0.0621 seconds.