View Artikel Ilmiah

Kembali
NIM (Student Number)K1C016002
Nama MahasiswaPUTRI SUCI RAMDANI
Judul ArtikelPenentuan Potensi Sebaran Batubara dengan Metode Geolistrik Resistivitas Konfigurasi Wenner di Daerah Cekungan Bentarsari Kecamatan Salem
AbstrakPenentuan potensi sebaran batubara di daerah Cekungan Bentarsari Kecamatan Salem telah dilakukan pada bulan Oktober 2019 hingga Maret 2020 dengan menggunakan salah satu metode geofisika yaitu metode geolistrik resistivitas konfigurasi wenner. Tujuan dari penelitian ini untuk mengetahui struktur lapisan bawah permukaan dan potensi sebaran batubara muda berdasarkan model penampang resistivitas dan penampang litologi daerah tersebut. Akuisisi data dilakukan pada lima lintasan yaitu Line 1, Line 2, Line 3, Line 4 dan Line 5 dimana masing-masing lintasan memiliki bentangan sebesar 200 meter. Pada tahap pengolahan data, metode inversi kuadrat terkecil dilakukan untuk mendapatkan model penampang 2D. Data model penampang 2D tiap lintasan digabungkan menjadi pemodelan 3D untuk mengetahui sebaran batubara pada daerah tersebut. Hasil interpretasi terhadap model penampang 2D tiap lintasan menunjukan bawah permukaan daerah tersebut terdiri dari lempung, lempung pasiran, batubara muda dan batupasir. Setiap lintasan menunjukan adanya lapisan batubara dengan interval nilai resistivitas sebesar 86,1 - 219 Ωm. Sehingga sebaran batubara pada daerah penelitian tersebar merata dengan potensi yang lebih besar berada di sebelah selatan lintasan.
Abstrak (Inggris)Determination of the potential distribution of coal in the Bentarsari Basin area of Salem District was carried out in October 2019 to March 2020 using one of the geophysical methods, namely the Wenner configuration resistivity geoelectric method. The purpose of this study was to determine the structure of subsurface layers and the potential distribution of lignite based on the resistivity and lithology cross-section models of the area. Data acquisition is carried out on five lines, namely Line 1, Line 2, Line 3, Line 4, and Line 5 where each line has a stretch of 200 meters. At the data processing stage, the least square inversion method is performed to obtain a 2D cross-sectional model. The 2D cross-section model data for each line is combined into 3D modeling to determine the distribution of lignite in the area. The results of the interpretation of the 2D cross-section model for each line show that the subsurface of the area consists of clay, sandy clay, lignite, and sandstone. Each line shows the presence of lignite seams with intervals of resistivity values of 86.1 - 219 Ωm. So that the distribution of lignite in the study area is spread evenly with greater potential located to the south of the line.
Kata Kuncibatubara muda, metode geolistrik, konfigurasi wenner, resistivitas.
Nama Pembimbing 1Sehah, S.Si., M.Si.
Nama Pembimbing 2Prof. Dr. –Ing. R. Wahyu Widanarto
Tahun2020
Jumlah Halaman13
Page generated in 0.0595 seconds.